Welcome!

Log in or register to take part.

CONECA (pronounced: CŌ´NECA) is a national numismatic organization devoted to the education of error and variety coin collectors. CONECA focuses on many error and variety specialties, including doubled dies, Repunched mintmarks, multiple errors, clips, double strikes, off-metals and off-centers—just to name a few. In addition to its website, CONECA publishes an educational journal, The Errorscope, which is printed and mailed to members bimonthly. CONECA offers a lending library, examination, listing and attribution services; it holds annual meetings at major conventions (referred to as Errorama) around the country.

CONECA was formed through a merger of CONE and NECA in early 1983. To learn more about the fascinating HISTORY OF THE ERROR HOBBY and THE HISTORY OF CONECA, we encourage you to visit us our main site Here

If you're not a member and would like to join see our Membership Application

We thank everybody who has helped make CONECA the great success that it is today!

Register Now

need help with 1964 Washington 25C reverse

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Conan62
    • Jun 2024
    • 494

    need help with 1964 Washington 25C reverse

    Happy holidays, this 1964 Washington 25C seems to be in pretty good shape. I estimate MS 63 or so. The reverse has some anomalies in all reverse lettering and both wings More on the right observed wing. It almost looks like it was re-stamped and cut at a different angle. I went through cherry pickers and all the basic websites and possibly match on FS 804 or 802Any help would be greatly appreciated. There is also a dye crack through the Eagles head.
    Wish you all the best.
    Last edited by Conan62; 12-26-2024, 07:23 PM.
  • Conan62
    • Jun 2024
    • 494

    #2
    Attached Files
    You do not have permission to view this gallery.
    This gallery has 6 photos.

    Comment

    • MintErrors
      Minterrors.org
      • Jun 2015
      • 3674

      #3
      In my opinion, I personally am not a fan of "extra thickness" doubled dies. It is subjective more than other things in this Hobby. It's difficult to distinguish what is "normal" and what is not. The only true way to tell is to have a nice BU example that represents that "normal coin for that year". Then you can see if there is any additional thickness worth mentioning.

      You should also take into consideration any wear and tear, circulation damage or other situations IF the coin(s) were circulated.

      Places like
      NEW Variety LISTINGS LincolnWheat Cents Lincoln Memorial Cents Buffalo Nickels Jefferson Nickels Mercury Dimes Roosevelt Dimes Standing Liberty Quarters WashingtonQuarters State QuartersDC & Territories America the Beautiful Quarters LibertyHalf Dollars FranklinHalf Dollars KennedyHalf Dollars EisenhowerDollars Susan B. Anthony Dollars SacajaweaDollars PresidentialDollars Bullion Commemoratives Mint Medals Coppers &Flying Eagles Indian Cents Half Dime Shield Nickels Liberty


      Doubleddie.com

      Those websites give good descriptions on where they see doubling occurring on known good examples. It's important to note where the doubling occurs, and look at your coin to see if it is a near exact match. The "look" can change a tad, since the working dies do age due to wear and tear, but the location of the doubling should stay the same.

      Doubled dies are working dies that received more than one impression of an image onto a working die. The spread is usually wide enough to notice a difference. The working dies have these impressions sunk into them. They are made of hard steel. So when the working dies squeeze that blank into a coin, what is sunk into the working die, is now raised on the coin.

      Wait a bit, others should chime in and offer their opinions as well.




      Three helpful posts:
      How to take better photos with a Cellphone:
      https://board.conecaonline.org/forum...th-a-cellphone

      RPM or DDO question? Help us help YOU:
      https://board.conecaonline.org/forum...lp-us-help-you

      What Forum to post your coin questions:
      https://board.conecaonline.org/forum...t-forum-to-use

      Gary Kozera
      Website: https://MintErrors.org

      Comment

      • Conan62
        • Jun 2024
        • 494

        #4
        Extra thickness double die?? Hmmm Interesting, I don’t believe I’ve encountered one, but if I did, I probably wouldn’t have known it anyway.. At least I have a possibility now. The coins are uncirculated. Thanks Gary!

        Comment

        Working...
        X