Welcome!

Log in or register to take part.

CONECA (pronounced: CŌ´NECA) is a national numismatic organization devoted to the education of error and variety coin collectors. CONECA focuses on many error and variety specialties, including doubled dies, Repunched mintmarks, multiple errors, clips, double strikes, off-metals and off-centers—just to name a few. In addition to its website, CONECA publishes an educational journal, The Errorscope, which is printed and mailed to members bimonthly. CONECA offers a lending library, examination, listing and attribution services; it holds annual meetings at major conventions (referred to as Errorama) around the country.

CONECA was formed through a merger of CONE and NECA in early 1983. To learn more about the fascinating HISTORY OF THE ERROR HOBBY and THE HISTORY OF CONECA, we encourage you to visit us our main site Here

If you're not a member and would like to join see our Membership Application

We thank everybody who has helped make CONECA the great success that it is today!

Register Now

1955D WASHINGTON QUARTER WRPM-001?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • rbroederer
    R. Bruce Roederer
    • Feb 2021
    • 1020

    1955D WASHINGTON QUARTER WRPM-001?

    I am looking at a nice 1955D Quarter (a surprisingly hard coin to find in MS66 and above). This coin is graded MS65 by NGC (6079161-005). The pictures look similar to those on DD for the WRPM-001. The subject coin has the following Die Markers: Obverse: Very light, weak E/W die scratch connecting the two legs of the R in LIBERTY slightly below center of the legs. Small die gouge (dot) about centered at the far left of the lower opening of the E in LIBERTY. Reverse: Very light E/W die scratch connecting the M and E of AMERICA slightly above center. Light WNW/ESE die scratch through the I and connecting the N in UNITED about one-fourth down from the top. Thoughts or comments?
    Attached Files
  • MintErrors
    Minterrors.org
    • Jun 2015
    • 3554

    #2
    The glare on the photos is too high in my opinion. I use a sheer cloth to knock down the glare. Its so much easier to see the features of the coins, especially on the field. If I choose to download a photograph and enhance it a bit, it is soooo much easier to add light than it is to remove it. Lighting to me, is the number one frustration when attempting to take photos. For my pics, I use up to three lights, normally two and I have four different types of sheer white cloth in various thickness and layer the area as needed to get a good photo with low to average lighting on the coin.

    One other thing I forget to mention to people. The monitors I use to take the photos I have them set on the default levels. I don't have the brightness and contrast up and or too low. This way what I see on the monitor before taking the pic should be the way most people will see the photo. If I raised or lowered the contrast and brightness then the presentation on other people's monitors would way too high or low.

    John W is a GREAT attributer but in my opinion, he would be even better if he offered a more centered shot of the Mint mark so it can be used to identify mint mark positions. To me, that seals the deal on being able to accurately match up a candidate to a good, known example.

    On your "D" photo I think I can make out minor split serifs. I suggest having the lighting on the serif side, even if the coin has to be shot upside down and then the photo turned right side up. I think i see the scratch within the legs of the "R", but the rest of the photos I cannot make out anything decisive.
    Last edited by MintErrors; 03-22-2022, 07:43 PM.
    Gary Kozera
    Website: https://MintErrors.org

    Comment

    • rbroederer
      R. Bruce Roederer
      • Feb 2021
      • 1020

      #3
      Hello Gary, I have tweaked some pics and varied the lighting as you suggested and I think they look better. Pic one is the MM with the light source on the side of the serifs. Pic 2 to 4 show the obverse die markers (The out of focus pic shows the "bump"): 1. Very light, weak E/W die scratch connecting the two legs of the R in LIBERTY slightly below center of the legs. 2. Small die gouge (dot) about centered at the far left of the lower opening of the E in LIBERTY. Pic 5 shows one of the reverse die markers ( Light WNW/ESE die scratch through the I and connecting the N in UNITED about one-fourth down from the top. I hope these are better for you. Bruce
      Attached Files

      Comment

      • MintErrors
        Minterrors.org
        • Jun 2015
        • 3554

        #4
        Bruce these are better, good job.
        The split serifs are there, there are at least 2 die markers that seem to match as well (the "R" and "IN")
        I'd say this it is a strong possibility this is WRPM-001.
        Gary Kozera
        Website: https://MintErrors.org

        Comment

        Working...
        X