Welcome!

Log in or register to take part.

CONECA (pronounced: CŌ´NECA) is a national numismatic organization devoted to the education of error and variety coin collectors. CONECA focuses on many error and variety specialties, including doubled dies, Repunched mintmarks, multiple errors, clips, double strikes, off-metals and off-centers—just to name a few. In addition to its website, CONECA publishes an educational journal, The Errorscope, which is printed and mailed to members bimonthly. CONECA offers a lending library, examination, listing and attribution services; it holds annual meetings at major conventions (referred to as Errorama) around the country.

CONECA was formed through a merger of CONE and NECA in early 1983. To learn more about the fascinating HISTORY OF THE ERROR HOBBY and THE HISTORY OF CONECA, we encourage you to visit us our main site Here

If you're not a member and would like to join see our Membership Application

We thank everybody who has helped make CONECA the great success that it is today!

Register Now

Announcement

Collapse
No announcement yet.

1941 no mint mark 3.42 penny

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1941 no mint mark 3.42 penny

    I found a 1941 No meant mark wheat Penny, that weighs 3.42 It seems to be a touch smaller than a regular cent but heavier any thoughts 20250120_014508.jpg
    Attached Files

  • #2
    In my opinion, this one to me- in my current state of achiness, it looks odd. I look at the reverse and see some lines running north south. The rim on the reverse is damaged from about K9 to K2 (clock reference). The rim damage isconcerning, it looks almost like its been under pressure. There are more lines on the obverse on Lincoln's coat, but a little less obvious.

    If you lay this coin on a table and place another copper cent side my side,by touch does one seem higher than the other?

    What about stacking them on top of each other and looking at the thickness. Does one look a little thicker ?

    Is your scale accurate? See if you can find a few copper cents that weigh 3.11 grams. Weigh them one at a time.

    This could simply be a Lincoln cent struck on thicker cent stock. The rollers simply were not right when rolling of this metal into sheets. A little thicker metal results in sliver of extra metal. Sure its out of tolerance by .18 of a gram.
    Gary Kozera
    Website: https://MintErrors.org

    Comment


    • #3
      No mint mark means the cent was made in Philadelphia. I think it was 2017 that they finally added a P mintmark onto the cent.
      Gary Kozera
      Website: https://MintErrors.org

      Comment

      Working...
      X