Welcome!

Log in or register to take part.

CONECA (pronounced: CŌ´NECA) is a national numismatic organization devoted to the education of error and variety coin collectors. CONECA focuses on many error and variety specialties, including doubled dies, Repunched mintmarks, multiple errors, clips, double strikes, off-metals and off-centers—just to name a few. In addition to its website, CONECA publishes an educational journal, The Errorscope, which is printed and mailed to members bimonthly. CONECA offers a lending library, examination, listing and attribution services; it holds annual meetings at major conventions (referred to as Errorama) around the country.

CONECA was formed through a merger of CONE and NECA in early 1983. To learn more about the fascinating HISTORY OF THE ERROR HOBBY and THE HISTORY OF CONECA, we encourage you to visit us our main site Here

If you're not a member and would like to join see our Membership Application

We thank everybody who has helped make CONECA the great success that it is today!

Register Now

Announcement

Collapse
No announcement yet.

State quarter die grinder marks.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • State quarter die grinder marks.

    I have found around 30 2005 P Minnesota State quarters from mint rolls that have die grinder marks. You can see where they smoothed out some scratches and a crack. My question is, are these considered a mint error and does it increase the value any? These are uncirculated coins. I also have some that show the scratched or cracked areas before they used the grinder. Would it make them more valuable if they were sold in a before and after set? Thanks

  • #2
    Here is a photo of an obverse with die grinder marks around Liberty and Washington's face. Also behind the back top of his head is a second area. These coins would have been stamped right after the die was ground on as these marks should disappear after a short time stamping. So what do you think, error, variety or nothing special? Thanks
    You do not have permission to view this gallery.
    This gallery has 1 photos.

    Comment


    • #3
      Here is a perfect example of die grinder marks. This is a Kansas state quarter with very apparent grinding. Look around Liberty and In God We Trust at these marks. These marks should disappear in around a hundred or so stampings. Shouldn't this be considered a type of mint error?
      You do not have permission to view this gallery.
      This gallery has 1 photos.

      Comment


      • #4
        Originally posted by Kriv24 View Post
        Here is a perfect example of die grinder marks.
        This is strike through Grease mark. not grinding.

        CONECA Attributer: John Miller

        Comment


        • #5
          Originally posted by Kriv24 View Post
          Here is a photo of an obverse with die grinder marks around Liberty
          the pic is not the best but this also looks like strike through grease marks. they do not grind... they polish... sounds like a verbiage thing but grind sounds hard a polishing is not as hard.

          CONECA Attributer: John Miller

          Comment


          • #6
            I used to work in a metals factory. I know what I am looking at. I bet if you contacted the mint and asked if they use rotary tools like a Dremel to smooth out scratches and gouges in a die, the answer would undoubtedly be yes! Now if the missing "T" in trust is considered an error than coins showing the grinding done to cause the error should also be considered an error. It is a road map to the "rust" error. Wouldn't you agree?

            Comment


            • #7
              the missing T is when the T is filled with a grease/goop like mixture. this is called a strike through grease ... it is an error... so re your other coins.... strike through grease errors..
              CONECA Attributer: John Miller

              Comment

              Working...
              X