Welcome!

Log in or register to take part.

CONECA (pronounced: CŌ´NECA) is a national numismatic organization devoted to the education of error and variety coin collectors. CONECA focuses on many error and variety specialties, including doubled dies, Repunched mintmarks, multiple errors, clips, double strikes, off-metals and off-centers—just to name a few. In addition to its website, CONECA publishes an educational journal, The Errorscope, which is printed and mailed to members bimonthly. CONECA offers a lending library, examination, listing and attribution services; it holds annual meetings at major conventions (referred to as Errorama) around the country.

CONECA was formed through a merger of CONE and NECA in early 1983. To learn more about the fascinating HISTORY OF THE ERROR HOBBY and THE HISTORY OF CONECA, we encourage you to visit us our main site Here

If you're not a member and would like to join see our Membership Application

We thank everybody who has helped make CONECA the great success that it is today!

Register Now

1972 LMC Possible struck thru?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Mammashoe
    • Feb 2022
    • 122

    1972 LMC Possible struck thru?

    Screenshot_20220805-200156_Gallery.jpg Screenshot_20220805-200221_Gallery.jpg On the obverse of the coin, you will see something that is in the shape of a figure 8 on Lincolns shoulder. What could this be? Screenshot_20220805-200156_Gallery.jpg Screenshot_20220805-200221_Gallery.jpg
  • MintErrors
    Minterrors.org
    • Jun 2015
    • 3554

    #2
    It is difficult to tell for me when I am on this tablet.
    With the photos provided, I cannot get the clarity to tell, if it is a strike through, lamination issue, die chip or simply a stain.


    If you look immediately to the right of that pick up point (pup), I believe there is another area like it, although not as obvious.
    OK
    If the area in question is:
    sunk into the coin, it may be a struck through.
    appears that part of the copper was torn away, it may be a lamination issue.
    Looks like a piece of metal, slightly higher that normal, almost like a drop of solder, it may be a die chip.

    If the area just looks normal, it very well may be post mint damage, possibly a stain happening after it left the mint.

    Gary Kozera
    Website: https://MintErrors.org

    Comment

    Working...
    X