1982D LD Zinc 1C RPM-001

[Shleppodella1]

No secondary outside of "D" but there's something going on inside of the "D" as well as a upper split sherif....

[Shleppodella1]

This has a upper split sherif on the "D" and what looks to be an inner strike inside the "D" along with some mushiness or rounding....

[Shleppodella1]

Now the IGWT and LIBERTY are LDS due to the "shelving" MD but the MM has a upper split sherif with a extra vertical line on the "D"...

[Shleppodella1]

Is it the 1968S WWHO-001 causing the doubling from the obv die paired with the rev used for the 1968S 1C WDDO-001?

[Shleppodella1]

This is an interesting mintmark it looks to be a D/D West or is it punch bounce?...

[Shleppodella1]

I see 4 and a upper right split sherif but one could argue the lower left single individual is another making it 5. Wow, that is Cr@Zy mint worker was...

[Shleppodella1]

I'm now starting to see the rolling edges like on the 19 as opposed to say the shelves on MD. I wasn't sure with the date until I seen the doubled eye...

[Shleppodella1]

FS-101
This has offset hub doubling (not to be confused with hob gobbling!) that shows as a strongly doubled eye, "19" of the date, back...

[Shleppodella1]

Thanks now I'll know what you mean for next time when I post pictures. I've been playing with flashlight and a piece of white paper to soften the light...

[Shleppodella1]

I looked on doubleddie.com and the CLOSEST I could see was Wexler's 1957D 10C WRPM-002 is that what you were referring to?
Because if so the MM...

[Shleppodella1]

Are these the 90°angle shots you were referring to? I tried to play with the lightning also to help show the doubling....

[Shleppodella1]

I would with luck like that are you Irish by chance because the best I've done in my 10 years is 2 RPM's in a roll with maybe some die chips added.

[Shleppodella1]

Found this roll surfing and it only took 30 rolls to find it so it really shows just how many of these that you have to go thru just to find something...

[Shleppodella1]

Yes, very nice . I'm working on getting a new Amscope so I can get those pics!

[Shleppodella1]

I figured it was the broken punch and yes the sites fixed I figured you would see the new post and figure it out. I see Mr. Motley was on it! Nice.

[Shleppodella1]

Is this the damaged mintmark punch that VV lists or a RPM?
It has the lower split sherif on the "D" which I made sure that there was proper...