Welcome!

Log in or register to take part.

CONECA (pronounced: CŌ´NECA) is a national numismatic organization devoted to the education of error and variety coin collectors. CONECA focuses on many error and variety specialties, including doubled dies, Repunched mintmarks, multiple errors, clips, double strikes, off-metals and off-centers—just to name a few. In addition to its website, CONECA publishes an educational journal, The Errorscope, which is printed and mailed to members bimonthly. CONECA offers a lending library, examination, listing and attribution services; it holds annual meetings at major conventions (referred to as Errorama) around the country.

CONECA was formed through a merger of CONE and NECA in early 1983. To learn more about the fascinating HISTORY OF THE ERROR HOBBY and THE HISTORY OF CONECA, we encourage you to visit us our main site Here

If you're not a member and would like to join see our Membership Application

We thank everybody who has helped make CONECA the great success that it is today!

Register Now

Announcement

Collapse
No announcement yet.

1964 “D” 5c (high right slight R/tilt) help with correct listing ID

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    1964 “D” 5c (high right slight R/tilt) help with correct listing ID

    Hello All
    Subject is 1964 “D” 5c Jefferson nickel, sorry missed that in topic title, high slightly far right with a cc slight tilt, I don’t have clear enough photos for verification of rpm so I will gut go of what is visible to the photos I have, I’ll try to get better at some point photos of subject
    Obv: looks like it is clashed but not sure pmd, looks to my eye slightly off center “IGWT” on edge and looks slightly die cap with doubling on tops of “IGWT”, could just be pmd would like opinions
    device hair ribbon displays a “More detailed Design”
    Date looks like doubling on “4” vertical bar,?
    Rev:LF; F1,F2 of steps show 3-4 maybe steps but notice the clash through middle of steps, note sure coin clash or not? MM is high and far right with tilt
    not sure if any significant enough to even be listed
    I ask for your thoughts and Thank you in advance
    Attached Files
    Last edited by MIMS.2Cents; 03-02-2024, 05:15 AM.
    Tags: None
  • #2
    I Just wanted to add the “mm” varieties compared with subject
    Attached Files
    Last edited by MIMS.2Cents; 07-15-2024, 02:53 AM.

    Comment

    • #3
      Hello MIMS.2Cents,
      I moved this topic to the Die Variety Forum. RPM and Double Die questions belong here.
      Bad news. You need to try and take your photo's closer and also try and take them in the "Fine" position of the camera. "Regular" photo are usually 640px. They need to be finer so we can zoom/crop the area in question. When I do this, to your
      photo's they are grainy/out of fucus this is how they look :

      1964-D-Jefferson_Coneca.jpg

      Comment

      • #4
        Much appreciate that and the proper locations for my posts, I have been working on better pictures, so going to have to pull them out again I did a quick photo shoot just to have before putting them away. One of them not sure may be a rpm but got to get a better pic and new thread on that one. Yeah I see what you mean it’s like hearing how you sound for the first time on a recorder!
        I knew they were bad but not as bad as after I post them but I’ll work on the 640 pixel not o tech savvy by Im used to doing film photography but don’t have any real beauties worthy of the hassle, Thank You for the guidance
        Mike

        Comment

        Previous template Next
        Working...
        X