Welcome!

Log in or register to take part.

CONECA (pronounced: CŌ´NECA) is a national numismatic organization devoted to the education of error and variety coin collectors. CONECA focuses on many error and variety specialties, including doubled dies, Repunched mintmarks, multiple errors, clips, double strikes, off-metals and off-centers—just to name a few. In addition to its website, CONECA publishes an educational journal, The Errorscope, which is printed and mailed to members bimonthly. CONECA offers a lending library, examination, listing and attribution services; it holds annual meetings at major conventions (referred to as Errorama) around the country.

CONECA was formed through a merger of CONE and NECA in early 1983. To learn more about the fascinating HISTORY OF THE ERROR HOBBY and THE HISTORY OF CONECA, we encourage you to visit us our main site Here

If you're not a member and would like to join see our Membership Application

We thank everybody who has helped make CONECA the great success that it is today!

Register Now

1973 Penny Error - Broadstrike or PM damage?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Leakatheryn
    • Sep 2022
    • 33

    1973 Penny Error - Broadstrike or PM damage?

    Hello Coneca Community~

    I have been holding on to a couple of coins that I am not sure about. I have been learning - reading and watching many videos but still am not sure about this coin in particular as it is on both sides.

    Any help would be appreciated.
    ~Lea

    Ps
    Sorry about the order the pics uploaded. I tried to change it, but it still comes out in the same order.
    Attached Files
  • MintErrors
    Minterrors.org
    • Jun 2015
    • 3554

    #2
    In my opinion, this looks like a dryer coin. The area on the reverse south near the rim looks like a dryer coin. My hesitation was there.... I looked at the obverse and thought it was a "struck through a late stage die cap". It's not a die cap, but a coin that could have been struck by a capped die.

    The reverse kinda seals it for me. The coin remains in a dryer or hot area for quite some time. If in a dryer, it gets that mushy look. Sometimes as it bounces around Ina dryer, the rim can be hammered by the constant drops. This might make the coin slightly smaller in diameter.
    The area near the rim on the reverse, below the Memorial building does look like what happens to dryer coins.

    The only other off the wall way that I know of is that someone used a chemical on the, coin. The caustic or acid would eat at the details, but the coin would be thinner and weigh a lot less than it is supposed to.

    My gut feeling is, a dryer coin. That is my opinion and I am stickin to it. So two of the three possibilities...dryer coin and acid treated would be post mint damage (PMD).
    Gary Kozera
    Website: https://MintErrors.org

    Comment

    • mustbebob
      Moderator
      • Aug 2007
      • 3050

      #3
      I agree completely with it being a dryer coin.
      Bob Piazza
      Lincoln Cent Attributer

      Comment

      • PNWMAKES
        • Dec 2021
        • 529

        #4
        Yep dyer coin see link below explaining it.



        Attached Files

        Comment

        • MintErrors
          Minterrors.org
          • Jun 2015
          • 3554

          #5
          I should try to answer the original posters' question about the broadstrike possibility. A broadstrike normally will cause a normal coin to be bigger, and the coin design should look pretty normal, and not mushy like this one is. Additionally, broadstrikes show the entire design on the obverse and reverse. Misaligned dies can have one side slightly off center and one side centered as it should be. Off-center coins should have both sides of the coin off-center.

          The different type of broadstrikes can be found on this long list provided by error-ref.com.
          https://www.error-ref.com/index-of-entries/


          Gary Kozera
          Website: https://MintErrors.org

          Comment

          • Leakatheryn
            • Sep 2022
            • 33

            #6
            Thank you all for your answers. I do appreciate it. I truly have been doing a lot of reading (from this site) and other reputable sites as well as watching "certain" you tube videos. I was not able to find the answer, and you all provided it for me. Thank you! ~Lea

            Comment

            Working...
            X