Welcome!

Log in or register to take part.

CONECA (pronounced: CŌ´NECA) is a national numismatic organization devoted to the education of error and variety coin collectors. CONECA focuses on many error and variety specialties, including doubled dies, Repunched mintmarks, multiple errors, clips, double strikes, off-metals and off-centers—just to name a few. In addition to its website, CONECA publishes an educational journal, The Errorscope, which is printed and mailed to members bimonthly. CONECA offers a lending library, examination, listing and attribution services; it holds annual meetings at major conventions (referred to as Errorama) around the country.

CONECA was formed through a merger of CONE and NECA in early 1983. To learn more about the fascinating HISTORY OF THE ERROR HOBBY and THE HISTORY OF CONECA, we encourage you to visit us our main site Here

If you're not a member and would like to join see our Membership Application

We thank everybody who has helped make CONECA the great success that it is today!

Register Now

Announcement

Collapse
No announcement yet.

1989 D Lincoln Memorial Cent RPM? PMD? or MD?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1989 D Lincoln Memorial Cent RPM? PMD? or MD?

    Been going through some of my IDK cents. Have this 1989 LMC that I can't match up for a RPM. I am thinking PMD or MD. Was wondering if I could get some input from the community. Thanks
    Attached Files

  • #2
    Evening, Notice the mintmark is flat or shelf like? That is always MD. I can see it a little less pronounced to the east of the 9 in the date also. Some call this localized MD. We have alot of this in the zinc cents. It's not an RPM Sorry. Keep looking, they are out there, just hard, and I mean hard in the zinc cents to find... Eric

    Comment


    • #3
      That's what I was thinking also just wanted to bounce it off someone else thank you

      Comment


      • #4
        Always important to ask if the question arises. That is why others are here - to help and offer opinions.

        I like to use the "paper trick".
        Take a piece of paper across the mintmark, just below the center.
        Tick the vertical center bar on the known good mint mark and another good reference point, like dead-center of a curve.

        step 1.jpg

        Then slide that over to the possible other mintmark.
        You can then see where the other parts of the possible mint mark might show.

        step 2.jpg



        I understand that mint marks were generally re-punched when the first (or more attempts) was not punched into the working die correctly. So some of the weaker mintmark might be very weak or not present at all. BUT, this give you a logical approach to see how far off the mintmark would be if in was an RPM., and where to look for hints.

        I also assume that they are re-using the same punch to reapply/add another mint mark on top of the old one.
        Last edited by MintErrors; 04-30-2022, 09:15 AM.
        Gary Kozera
        Website: https://MintErrors.org

        Comment


        • #5
          Good tip will defiantly use it probably today to go through the stack of maybes

          Comment

          Working...
          X