Tweet
Good morning all. I believe that is what this one is. If any one can tell me for certain I would appreciate the help. Thanks
-
-
In my opinion, when one side of the coin is off-center and the other side of the coin is fine....Its a Mis-Aligned Die (MAD).
This one is pretty significant, in my opinion. Not too many seen this far off.
Broad strikes are typically a coin that has ALL of the details of the coin.
The broad strike is usually bigger than a normal coin of the same denomination. both sides should have the appearance of being broad struck, especially if the broadstruck is out of collar.
Three helpful posts:
How to take better photos with a Cellphone:
https://board.conecaonline.org/forum...th-a-cellphone
RPM or DDO question? Help us help YOU:
https://board.conecaonline.org/forum...lp-us-help-you
What Forum to post your coin questions:
https://board.conecaonline.org/forum...t-forum-to-use
Gary Kozera
Website: https://MintErrors.org -
Thanks for your diagnostics MintErrors. That helps me a lot.Comment
-
I'm with Gary and I'll add that the reverse looks like it may have received the strike from a slightly tilted die. There is a light secondary rim on the reverse at k12 with weakness of details near the rim directly opposite (K6).Comment
-
Thanks Gary and Pete’s, after searching through some known coins. I see what you guys mean by both sides reflect the Broadstrike. Lesson learned. The excitement always seems to take over before logic brings me back down to earth.Comment
Comment