Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Welcome aboard !
-
In my opinion, they could be die scrapes. Possible feeder finger damage as well. Here is a link:
https://www.error-ref.com/die-scrapes/
Leave a comment:
-
in my opinion I think they could very well be legit. Now as far as IF the coins were searched some time ago for the 1955 DDO is a possibility. It is simple...
Leave a comment:
-
I'm my opinion, your coin is not DDO-001. That one you can see without magnification. It can be seen here :
http://varietyvista.com/09d%20WQ%20...
Leave a comment:
-
I understand you are fairly new to collecting. But sending this in to a third party grading service can get pricey. You have to consider spending close...
Leave a comment:
-
I agree. It's lower, almost shelf like or step like. One additional possibility is a minor split plating, where the striking of the coin may have ruptured...
- 1 like
Leave a comment:
-
In my opinion, I believe if it was off-center the design elements to the east would be off the coin. Since the west side of the coin on the obverse is...Last edited by MintErrors; 05-08-2024, 12:21 PM.
Leave a comment:
-
Save them as jpg
Ensure you remove any unnecessary background by cropping the photo.
Last is to reduce the size in pixels. If...Last edited by MintErrors; 05-08-2024, 12:25 AM.
Leave a comment:
-
Welcome back ! This is a odd one for sure. I will download the photos and have a closer look at it in the morning.
Leave a comment:
-
I can offer some help in taking photos. Its an easy process:
IF you are using a phone:
Find a box, about 6x6 or 8x8.
Place...Last edited by MintErrors; 05-06-2024, 10:35 PM.
Leave a comment:
-
One thing the CONECA staff likes to see is one coin per post. That way there is far less confusion on who is talking about which coin.
Without...
Leave a comment:
-
Welcome aboard.
There are some good members here to answer your coin related questions.
Over the years I have noticed there are a lot...
Leave a comment:
-
The working dies may have been clogged with grease in that area which would give the coin the effect of the grease filled die, not allowing the design...
Leave a comment:
-
Leave a comment:
-
The working dies have the image sunk into the die so when the coinis struck the design is raised on the coin. When the mint workers did maintenance on...Last edited by MintErrors; 05-06-2024, 12:47 AM.
- 1 like
Leave a comment:
-
In my opinion, this all looks like die deterioration damage.
The affected letters are lower and flat.
These dies eventually wear out, become...Last edited by MintErrors; 05-05-2024, 08:47 AM.
Leave a comment:
-
In my opinion, this seems like it is split plating damage. This occurs when the planchet is struck into a coin. The pressure was too intense and it damaged...
Leave a comment:
-
IF you don't receive a reply in some time over at attributions or examinations, you can Private Messsage Jamez ( yes, with a z). Go to the member list...
- 1 like
Leave a comment:
-
In my opinion, your photos are fine. I can't say that for the example photos on variety vista I cannot get the photo sizes to the right dimensions in...
Leave a comment:
No activity results to display
Show More
Leave a comment: